converting Eagle to Super Moon cresta
=======================================
28/04/06 - by Andy Welburn


1. get your Eagle pcb..
2. confirm which romset you have ('eagle' or 'eagle2' to use MAME roms names)

equivalency table :

Eagle	Eagle2 	Super Moon Cresta
===================================
e1	e1.7f	927
e2	e2	928a
f03	f03	929
f04	f04	930
e5	e5	931
e6	e6.6	932a
e7	e7	933
e8	e8	934

Change these roms first and see if the game boots up and runs without any errors, 
it might look weird as it will be playing super moon cresta with eagle graphics.

Once you think its running and playing ok, change these roms on the 
graphics daughterboard:

e10	e10.2	epr203
e12	e12	mcs_d
e9	e9	epr202
e11	e11	mcs_c

If your pcb doesn't have the eprom labels marked like as can be 
seen above in the eagle table, do the following :

1. get WinRomident and install it.
2. pull *1* rom off your eagle pcb and dump it, run it through romident 
   and see what you get. this should tell you which eagle rom it is, 
   write it on that chip with a marker or something.
3. Burn the equivalent super moon cresta rom onto another blank eprom and 
   put it in the empty socket on the pcb.
4. repeat steps 2 and 3 until you're done.

enjoy.

Andy