Jaleco - Pinbo Pinouts
-----------------------
typed up by Andrew Welburn on 1.05.09
http://www.andys-arcade.com

This is a single layer pcb, these pinouts were worked out directly 
from the pcb, but typed up later from an adapter i made, so check the 
oreientation of the start number/letter on the pcb itself.



             SOLDER                              PARTS
   ________________________________|___________________________________
             Gnd               | A | 1 |          Gnd
             Gnd               | B | 2 |          Gnd
             +12v              | C | 3 |          +12v
                               | D | 4 |          
             SPK+              | E | 5 |          
             BLUE              | F | 6 |          SYNC
             RED               | H | 7 |          GREEN
                               | J | 8 |          
                               | K | 9 | 
             COIN              | L | 10|          START 1
                               | M | 11|          
             BUTTON 1          | N | 12|          BUTTON 2
                               | P | 13|          BUTTON 3
                               | R | 14|          
                               | S | 15|          
                               | T | 16|          
                               | U | 17|          
                               | V | 18|           
             +5v               | W | 19|           +5v
             +5v               | X | 20|           +5v
             Gnd               | Y | 21|           Gnd
             Gnd               | Z | 22|           Gnd       
   --------------------------------------------------------------------